Dispensing Equipment

PAR4C-ACCThe automation of the dispensing of silicone materials can provide the end user with a number of technical and cost based advantages over hand mixing and dispensing methods. Control is the main advantage: of the mixing ratio, the size and volume of the shot and where it is applied. This improved control leads to savings in wastage of material, fewer rejected parts, increased output and overall higher product quality. Reductions in production times and the number of operators required to do the job also make for good economics.

The correct choice of machine can only be made after a thorough evaluation of the material, application and production methods. ACC is very well placed to ensure that the best machine is chosen for a particular application due to our in depth knowledge of silicone materials together with the dispensing equipment. 

Factors Affecting Machine Choice




1 or 2 Part
Cure type
Viscosity or ability to flow
Filler content & type
Speed of cure
Mix ratio
Density or SG

Volume of material
Single or multi shot
Applying bead or filling
Flow rate required
Is degassing required

Number of parts per hour
Is vacuum required?
Integrated with robot or XY
Manual operation or automated
Production space/area
In line or off line
Pneumatic or electric

Before a machine is supplied it is prudent to first test the material through the machine in a test environment to confirm the recommendation. ACC together with the machine manufacturers have built up a small database of tested ACC silicone materials to improve the selection process, reduce time and eliminate costly mistakes

Piston pumps or positive displacement pumps offer a simple and often cost effective method to dispense silicones.  The action of the piston forces material out in one direction and as it pulls back, a non-return valve closes and allows a vacuum to build. This vacuum will draw fresh material into the pump ready for the next shot. Carefully balanced mix ratios can be maintained by using pistons of differing sizes.   

They offer the following benefits:

  • Ideal for precise metered shot applications
  • Adaptable for use in hazardous or "zoned" areas. (i.e. can be totally pneumatically operated)
  • Higher potential pressures can be created
  • Higher viscosity handling capability
  • More suitable for abrasive materials

Gear Pumps

Gear pump technology is utilised to provide a precise constant output of mixed material. As the name suggests they utilise two gears machined to very tight tolerances, as they turn material is drawn in and through the gears, matching two different size gears will enable accurate mixing of two part systems. 

They can be used to put down long beads of adhesive or dispense encapsulation and moulding materials. Gear pumps are better suited to low viscosity materials they do not cause excessive wear on metal parts. If a metered shot is required this can be done using a timer. 

They offer the following benefits:

  • Constant material flow rate.
  • Less moving/wearing parts.
  • Low retained capacity/volume in pump.
  • Low air entrapment
  • Relatively compact in size.
  • Rotary rear seal for longevity.
  • Electrically driven.
  • Longer material hose length capability.

Pail Presses

Used primarily to dispense high viscosity liquids or paste materials. Material must be supplied in a suitable straight sided container usually 20kg or 200kg's. A follower plate of the correct diameter is lowered into the top of the container (inside the plastic liner) and hydraulically forced down, as it moves down the material is pressed out through an opening in the follower plate which is connected to a hose. An airtight seal is provided around the edge of the follower plate via a rubber seal attched to the plate. 

This process is ideal for dispensing 1-part silicones and 2-part silicones can be mixed using two pail presses moving at different rates to provide the correct mix ratio.

Mixing Heads

Mixing of two part materials is normally carried out just prior dispensing in order to avoid the need for excessive purging and cleaning of pipe work and hoses. The type of mixers used will in the main depend upon the rheology of the material. Wherever possible we recommend the use of static mixers as these are low cost and disposable. Some slightly more difficult materials may require the use of a rotary static mixer although the gun will be more expensive the mixers are still disposable. The final choice of using a dynamic mixing head is by far the most expensive and will require regular purging and cleaning to avoid cure of material in the head.

Static Mixers

  • Disposable mixer
  • Low shear
  • Cost effective
  • Low maintenance
  • Low ratios (i.e. 1:1 to 15:1 ratio)

Rotary Static Mixers

  • Disposable mixer
  • Medium shear
  • Cost effective
  • Low maintenance
  • Low to medium ratios (i.e. 5:1 to 25:1 ratio)

Dynamic Mixing Heads

  • Non-disposable mixer
  • High shear
  • Higher flow rates
  • Requires solvent flushing
  • Medium to high ratios (i.e. Greater than 15:1 ratio)
  • Ancillary Products

The choice of additional standard options may be necessary due to the nature of the material being used or by the individual application, in other cases they may be chosen to simply to meet specific customer requirements.  
Standard available options include:

Auto-Bulk feed - Enables automatic replenishing of reservoirs by gravity or pumped feed    

Level sensing - High-level sensors will give a visual & audible alarm if bulk feed supply runs out.

Low-level sensors - Give visual and audible alarm when reservoirs run low

Stirring - Prevents filler fallout and maintains constant S.G

Vacuum - For encapsulating electronic components within a Vacuum Chamber

Hardened parts - Normally required when processing heavily filled materials (thermally conductive)
                            Includes hardened gear pumps, pump tubes/piston rods & mixer valve spools

Anti-Gel timer -To dispense a shot to "purge" the mixer.

Shot counter/repeater - dispense several pre-set metered shots into the component

Dispensing valves - Variety of valves available to control and meter the flow of material


ACC Silicones Ltd, Amber House, Showground Rd, Bridgwater, TA6 6AJ
Tel: +44 (0) 1278 411400 Fax: +44 (0) 1278 411444